Effective cleaning process yields operational efficiency gains and 40% energy cost savings

ipcm® Industrial Cleaning Technologies
N.17 – 2020 FEBRUARY

OTERACCORDI chooses modified alcohol solution to meet growing parts cleaning challenges.

The manufacturing of parts for hydraulic fi ttings, sanitary installations and industrial fi xings demands technical expertise, leading-edge technology and quality commitment. The continual pursue of these requirements over decades has made the Italian company OTERACCORDI what it is today – a leader in the fi eld of thermo-hydraulics, sanitary fi xing systems and industrial fi xings. Since its foundation in 1933, the company has been expanding its expertise and is now operating under four distinct brands, off ering products specific to the building sector, heating and plumbing. It also designs and produces customized parts for the automotive sector, agriculture and earth moving equipment.
“Our commitment to technological innovations is fundamental to our success. We have, for example, large, horizontal multi-station presses for cold moulding. There are only very few companies in Italy that have such capabilities. We also have a range of chip removal machines for further processing,” said Cristiano Ballan, Head of Production at OTERACCORDI.

Critical role of metal degreasing in quality assurance

OTERACCORDI uses diff erent metal types, including carbon steel and stainless steel, to produce its large variety of products – from collars, clamping & fi xing systems, cast iron all the way to pickled sheet and hydraulic fi ttings. Since the parts produced are subjected to subsequent internal/external threading, galvanic treatments and packing, the fi nished and semi-fi nished components must be cleaned and degreased to an extremely high standard. The volumes and types of metals to be cleaned, along with the complex dimensional and geometric structure of the components, are just a few challenges associated with the metal parts cleaning process. Needless to say, extra care must be taken to ensure that the parts are not damaged during the degreasing phase.
As OTERACCORDI continues to win new contracts on the back of its success, it is proving increasingly diffi cult to maintain quality and effi ciency in metal cleaning activities as there are now far more parts to be handled.
In 2018, it produced 60 million components. On average every single unit produced is cleaned twice. With increased production, the volume of parts cleaning is going to rise further still, up to 120 million pieces in 2019 and 130 million in 2020.
For almost three decades, the company had been using an aqueousbased cleaning system for parts cleaning but it was struggling to maintain consistent results.
The signifi cant energy consumption as a result of the long cleaning cycle represented another fi nancial burden on top of the high waste management costs. Now that the production pace would set to intensify further, OTERACCORDI felt increasingly compelled to search for an alternative cleaning solution that would enhance quality standard and operational effi ciency.

Cleaning with modifi ed alcohol – high performance results and eco-compatibility

During a trade show visit, OTERACCORDI encountered IFP, a leading manufacturer of modifi ed alcohol cleaning machines. OTERACCORDI had always thought positively about modifi ed alcohols due to their ecocompatibility, and that made it even keener to test out their cleaning eff ectiveness. For the cleaning trials, IFP recommended the virgin-grade, high-performance modifi ed alcohol DOWCLENE™* 1601 provided by SAFECHEM, a chemical service company.
Produced synthetically, the distillable solvent has both non-polar and polar properties. This means it can eff ectively remove non-polar contaminants such as fats and oils as well as many water-based contaminations. Its defi ned and narrow boiling range also makes residue-free drying possible, which results in outstanding cleaning results with high surface tension.
DOWCLENE™* 1601 is also characterized by low toxicity and good biodegradability. Compared to aqueous cleaning, no water is consumed in the process and there is also less space requirement.

Combining IFP’s technology with DOWCLENE™* 1601: Cleaning results have us ‘sold on the spot’

After a four-month evaluation and testing period, the conclusion for OTERACCORDI was clear – the cleaning test outcomes were so satisfying that the company did not even see the need to try out other technologies. OTERACCORDI decided to invest in the IFP machine model KP 1000 MAX which would run on DOWCLENE™* 1601. The machine operates under full vacuum in all stages, and is designed with two specifi c ends in mind – reduced energy consumption and oil recovery for reuse in the production cycle. It is also constructed to keep machine maintenance to the minimum. Equipped with fully selfcleaning chambers, there is no risk of bottom deposits or encrustation, nor is there the need to open tanks, chambers and distillers for cleaning. Improved distillation of the solvent, together with filtration and oil separation systems, ensures an optimized process with extremely low disposal and waste management costs.
Cristiano Ballan noted, “When we saw the fi rst trial cleaning results with DOWCLENE™* 1601, we were practically sold on the spot.
Also, the ability of the IFP machine to recover processing oil has been a decisive factor for us since it represents further savings and optimization for the company.”

Gains on all fronts – operational effi ciency, energy savings and outstanding cleanliness

The new installation went into operation in September 2018. Brenntag Italia, SAFECHEM’s distribution partner, supplied a fi rst fi lling of 2000L DOWCLENE™* 1601 to OTERACCORDI. The delivery of the solvent in SAFECHEM’s solvent risk management tool SAFE-TAINER™ System further ensures safe and sustainable transport, storage and handling of the solvent. In close cooperation with SAFECHEM, Brenntag Italia also provides the fi rm with technical support and consultancy to ensure an optimized cleaning process.
The tangible gains as a result of the adopted solution have validated OTERACCORDI’s decision to opt for modifi ed alcohol technology after years of aqueous cleaning. “Our cleaning cycle has gone down from 50 minutes to just 20 minutes. What’s more, we’re able to save at least 40% of the energy costs. Apart from consistent good cleaning results, the quality of surface coatings such as galvanizing or zinc plating on cleaned parts has also improved,” Cristiano Ballan summed up the benefi ts.
Furthermore, OTERACCORDI can regularly monitor the solvent condition using SAFECHEM’s MAXICHECK™ Test Kit to ensure optimal solvent management. Results recorded in an operating diary will be forwarded to SAFECHEM who can readily provide recommendation in case of any abnormalities. “Since switching from aqueous cleaning to a solvent cleaning system, the way we work has changed for the better.
We have a great collaboration with SAFECHEM, IFP and Brenntag Italia; and the support we receive on the technical level is fi rst-class. We are really happy with our decision and the resulting outcomes,” concluded Cristiano Ballan.

™ Trademark of SAFECHEM
™* Trademark of The Dow Chemical Company

Download the full news in PDF


Cosa dicono di noi sulle testate di settore

Di seguito alcuni articoli, realizzati da nostri clienti, in cui vengono descritte le caratteristiche delle loro attività e come l’utilizzo dei nostri impianti di lavaggio sottovuoto contribuiscono alla realizzazione qualitativa dei loro prodotti.

Il Gazzettino

Mercoledì 26 Agosto 2020

IFP Europe alla frontiera “verde” del made in Veneto

L’azienda padovana di Galliera ha messo a punto macchine di lavaggio modernissime ed ecologiche per prodotti in metallo

IPCM® Industrial Cleaning Technologies

MAY 2020

3B Fluid Power

Modified alcohol cleaning solution transforms parts cleaning into strategic advantage

L’impianto di lavaggio KP MAX 600 di IFP Europe.

IPCM® Industrial Cleaning Technologies

N. 17 – 2020 FEBRUARY


Cleaning as an added value for the PVD-chrome plated components of high-end shower systems

IPCM® Industrial Cleaning Technologies

N.17 – 2020 FEBRUARY


Effective cleaning process yields operational efficiency gains and 40% energy cost savings

LE DECOLLETAGE & industrie


La première machine à laver hybride de la vallée

L’actu de la vallée de l’Arve



Lathuille Hudry

KP Hybrid, la machine à laver deux en un

EUROPEAN business


The green way to wash

Interview with Giacomo Sabbadin, Managing Director of IFP Europe Srl.

IPCM® Industrial Cleaning Technologies

N. 14 – 2018 OCTOBER


Eco-friendly cleaning plants: FP Europe’s key to success


#3 Anno 74 – Aprile 2018


L’alcool modificato sta riscuotendo molto successo in applicazioni dove spesso venivano impiegati i solventi clorurati o acqua e detergenti. Questo grazie alla tecnologia altamente collaudata, la migliore presente sul mercato, di IFP Europe.

IPCM® Industrial Cleaning Technologies

n.9 – May 2016


La completa automazione per la massima qualità dei processi di lavaggio dei pezzi.


n.85 – Gen/Feb/Mar 2016

Nuova Torneria Zanotti

Ritorno al futuro: dall’acqua al solvente

IPCM® Ibérica/Latino América Magazine

N. 13 – 2016 Febrero/Fevereiro

Bitron España

La estrategia del Grupo Bitron para el desengrase eficaz de los dispositivos mecatrónic


Anno XXI – n.84 – Ott/Nov/Dic 2015


Innovare per competere: automazione spinta nel lavaggio della minuteria

IPCM® Ibérica/Latino América Magazine

N. 12 – 2015 Novembro/Noviembre


Planta de lavado ecológico para la limpieza de quincallería metálica de precisión


Anno XXI – n. 83 – Lug/Ago/Set 2015


Lavaggio di precisione per impianti dentali


N. 7 – 2015 MAY


Components for gas cooking appliances thanks to the modified alcohol cleaning technology




Relaunching a well-established brand by innovating the cleaning process


JUNE 2014


From perchlorethylene to modified alcohols for cleaning oil-pressure components: a virtuous path


MARCH 2014

Metal Work

One solution for cleaning multi metal components treated with different cooling lubricants



A&B Torneria

Modified alcohols vacuum washing: a success key in the precision mechanical turning field by IFP EUROPE


JULY 2013

IFP Europe

Italian technology in high efficiency and low consumption vacuum cleaning machines: IFP’s solution